Sony CFS-1085S - Dial Pointer Installation

7
CFS-1085S
2-6. DIAL POINTER INSTALLATION
PVC shaft
Chassis
Knob (tune)
Knob (tune)
Chassis
Window
Pointer
Pointer
Notch
Tuner board
MIN
(Fig-2)
MIN
Screw (2.6X5)
5
2
1
(Fig-1)
1 Turn the PVC shaft fully counterclokwise.
2 Place the pointer in the chassis groove.
3 Line up the tip of the pointer with the notch in the chassis.
(Fig-1)
4 Attach so that the knob (Tune) is at the position shown in
Fig-2.
5 Fasten the knob (tune) to the PVC shaft with the screw.