Sony CFS-F5 - Service Manual

SPECIFICATIONS
Tape recorder section and general
Recording system 4-track 2-channel stereo or monaural
Fast winding time Approx. 2 min. with Sony Cassette C-60
Frequency
response
50—-16,000
Hz
(with
metal
cassette,
with
the
Meta. EQ button depressed and BIAS
button depressed)
DOLBY NR OFF: 40 dB
DOLBY NR ON: improved by 5 dB at 1 kHz,
10 dB at above 5 kHz
Total harmonic distortion
5%
0,08% (WRMS)
Two-way, coaxial type
Approx. 16 cm (6'/, inches) dia. woofers
Approx. 5 cm (2 inches) dia. tweeters
Two line input/phono input jacks (phono
jack)
with the Input Selector set to LINE IN:
sensitivity 0.24 V (—10 dB)
input impedance 100 kilohms
with the Input Selector set to PHONO:
sensitivity 4.35 mV (~45 dB)
input impedance 50 kilohms
One mixing microphone input jack (mini-
jack)
for low impedance microphone
sensitivity 0.78 mV (—60 dB)
Two line output jacks (phono jack)
load impedance 10 kilohms or higher
rated output 0.44 V (-5 dB) at load
impedance 47 kilohms
Two external speaker jacks (minijack)
for 4-ohm to 8-ohm impedance speaker
Power consumption
S/N Battery life
Dimensions
Wow and flutter .
Speakers
Weight
Inputs
Outputs
Power requirements 120 V ac, 60 Hz
12 V dc, eight batteries size D (IEC
designation R20)
12V car battery with optional Sony Car
Battery Cord DCC-120
18 W ac
Approx. 12 hours of continuous recording
with the Built-in Microphones using
Eveready Heavy Duty Batteries No. 1250
Approx. 522x297x132 mm (w/hid)
(20°/,x115/,x5'/, inches)
incl. projecting parts and controls
not incl. handle
Approx. 6.7 kg (14 Ib 12 0z)
incl. batteries

Sony CFS-F5 Specifications