Table of
contents
Operation
Search
MENU/Settings
Search
Index
151
GB
Cannot operate the touch panel buttons correctly or fully.
• Perform [Calibration] (page 116).
• [Housing] is set to [On] (page 109).
The paint pen operation reacts at inappropriate points.
• Perform [Calibration] (page 116).
The lens gets fogged.
• Moisture condensation has occurred. Turn off the camera and leave it for about an hour before using
it.
The camera becomes warm when you use it for a long time.
• This is not a malfunction.
The Clock Set screen appears when you turn on the camera.
• Set the date and time again (page 124).
• The internal rechargeable backup battery has discharged. Insert a charged battery, and set aside for
24 hours or more with the power left off.
The date or time is incorrect.
• The Area Setting is set to a different location than your current location. Change the setting by
t (Settings) t (Clock Settings) t [Area Setting].
Touch panel
Others
To Next Page
Loading...
Need help?
General
