13
Getting started
• To use up the batteries completely, put the
camera in the slide show mode (page 64) and
leave it that way until the batteries are used up.
• Do not peel off the external seals or damage the
batteries. Never use batteries from which the
seals have been partially or completely
removed, or batteries that have been split in any
way. These may cause leakage, explosion, or
heat-up of the battery, and personal scald or
injury may be caused. These may cause a
malfunction of the battery charger.
Inserting the batteries
, Open the battery cover.
Press V on the OPEN button and slide it in
the direction of the arrow to open the cover.
, Insert the batteries.
Match the +/– poles of the batteries to the +/
– marks inside the battery case.
• From time to time, use a dry cloth to wipe any
dirt off of the battery terminals and the contacts
inside the inner cover. Skin oil and other dirt on
the battery terminals and contacts can
significantly shorten the operating time
provided by the batteries.
1
2
To Next Page
Loading...
