To Add a Wi-Fi Sleep Policy
1
From the Homescreen, tap .
2
Find and tap Settings > Wi-Fi.
3
Tap , then tap Advanced > Keep Wi-Fi on during sleep.
4
Select an option.
To Find the MAC Address for Your Device
1
From the Home screen, tap .
2
Find and tap Settings > Wi-Fi.
3
Tap
. The MAC address is displayed in the list.
WPS
WPS (Wi-Fi Protected Setup™) is a wireless networking standard that helps you to
establish secure wireless network connections. WPS makes it easy for you to set up Wi-
Fi Protected Access® (WPA) encryption to secure your network. You can also add new
devices to an existing network without entering long passwords.
Use one of these methods to enable WPS:
•
Push button method – simply push a button on a WPS-supported device, for example, a
router.
•
PIN method – your device creates a random PIN (Personal Identification Number), which
you enter on the WPS-supported device.
To Connect to a Wi-Fi Network Using a WPS Button
1
From your Homescreen, tap
.
2
Find and tap
Settings
>
Wi-Fi
.
3
Turn on Wi-Fi if it is not already on.
4
Tap
>
Advanced
>
WPS Push Button
, and then press the WPS button on the
WPS-supported device.
To Connect to a Wi-Fi Network Using a WPS PIN
1
From your Homescreen, tap .
2
Find and tap
Settings
>
Wi-Fi
.
3
Turn on Wi-Fi if it is not already on.
4
Tap
>
Advanced
>
WPS PIN Entry
.
5
On the WPS-supported device, enter the PIN that appears on your device.
Sharing your mobile data connection
You can share your mobile data connection with other devices in several ways:
•
USB tethering
– share your mobile data connection with a single computer using a USB cable.
•
Bluetooth® tethering
– share your mobile data connection with up to five other devices via Bluetooth®.
•
Portable Wi-Fi hotspot
– share your mobile data connection simultaneously with up to 8 other devices, including
devices that support WPS technology.
49
This is an internet version of this publication. © Print only for private use.
To Next Page
Loading...
