EasyManua.ls Logo

Sony D6653 - Calling; Multiple and Conference Calls

Sony D6653
146 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To change the SIM card PIN2
1
From the Homescreen, tap .
2
Find and tap Settings > Call.
3
Tap Fixed dialing numbers > Change PIN2.
4
Enter the old SIM card PIN2 and tap OK.
5
Enter the new SIM card PIN2 and tap OK.
6
Confirm the new PIN2 and tap OK.
To Send Incoming Calls from a Specific Contact Directly to Voicemail
1
From your Homescreen, tap
.
2
Find and tap .
3
Select the contact which you want to direct all incoming calls automatically to
voicemail for.
4
Tap
> .
5
Mark the checkbox beside All calls to voicemail.
6
Tap SAVE.
Multiple calls
If you have activated call waiting, you can handle multiple calls at the same time. When it
is activated, you will be notified by a beep if you receive another call.
To activate or deactivate call waiting
1
From your Homescreen, tap
.
2
Find and tap
Settings
>
Call
>
Additional settings
.
3
To activate or deactivate call waiting, tap Call waiting.
To answer a second call and put the ongoing call on hold
When you hear repeated beeps during a call, drag to the right.
To reject a second call
When you hear repeated beeps during a call, drag
to the left.
To make a second call
1
During an ongoing call, tap . The call log is displayed.
2
Tap to display the dialpad.
3
Enter the number of the recipient and tap
. The first call is put on hold.
To switch between multiple calls
To switch to another call and put the current call on hold, tap Switch to this call.
Conference calls
With a conference or multiparty call, you can have a joint conversation with two or more
people.
For details about the number of participants that you can add to a conference call, contact
your network operator.
To Make a Conference Call
1
During an ongoing call, tap . The call log appears.
2
To display the dialpad, tap .
3
Dial the number of the second participant and tap
. The first participant is put on
hold temporarily.
4
To add the second participant to the call and start the conference, tap .
5
To add more participants to the call, repeat the relevant steps as described above.
76
This is an internet version of this publication. © Print only for private use.

Table of Contents

Related product manuals