Sony DAV-DZ110 - Step 1: Assembling the Speakers

9
GB
Getting Started – BASIC –
Before connecting the speakers, attach the speaker stand to the speaker.
(For the speakers of DAV-DZ410 only.)
Note
• Spread a cloth on the floor to avoid damaging the floor.
Ti
p
• You can use the speaker without the speaker stand by installing it on the wall (page 23).
1 Secure the post to the base.
The long post is for floor use, the short post is for tabletop use.
2 Draw the speaker cord through the hole on the base, then stand it up.
Step 1: Assembling the Speakers
Post (long)
Post (short)
Base
or
Speaker cord
Bottom of the
base
,
continued