Getting Started
15
GB
Connect the supplied AM/FM aerials for listening to the radio.
Terminals for connecting the aerials
Notes
• To prevent noise pickup, keep the AM loop aerial away from the system and other components.
• Be sure to fully extend the FM wire aerial.
• After connecting the FM wire aerial, keep it as horizontal as possible.
• When you connect the supplied AM loop aerial, connect the black cord (B) to the U terminal, and the white cord
(A) to the other terminal.
• If you connect the system to an outdoor aerial, ground it to protect against lightning. To prevent a gas explosion,
do not connect the earth wire to a gas pipe.
Step 2: Aerial Hookups
Connect the To the
AM loop aerial AM terminals
FM wire aerial FM 75Ω COAXIAL jack
COAXIAL
AM
FM
75
FRONT R
CENTER WOOFER
FRONT L
SURR
R
SURR
L
VIDEO 1
VIDEO OUT
AUDIO OUT
VIDEO IN
AUDIO IN
L
R
VIDEO 2 MONITOR OUT
VIDEO IN
S VIDEO
(DVD ONLY)
VIDEO
AUDIO IN
L
R
COMPONENT VIDEO OUT
PB/CBYPR/CR
AM loop aerial
FM wire aerial
A
B
AM
continued
To Next Page
Loading...
