Sony DAV-TZ710 - Adjusting the Delay between the Picture and Sound; Changing the Input Level of the Sound from Connected Components

54
GB
Adjusting the Delay
Between the Picture and
Sound
[A/V SYNC]
When the sound does not match the pictures on
the TV screen, you can adjust the delay between
the picture and sound.
1 Press DISPLAY.
2 Press X/x to select [A/V SYNC],
then press .
3 Press X/x to select a setting, then
press .
•[OFF]: Off.
• [ON]: You can adjust the delay between
the picture and sound.
Note
• Depending on the input stream, [A/V SYNC] may not
be effective.
Changing the Input Level
of the Sound from
Connected Components
The sound distortion of the connected
component may be improved by reducing the
input level.
1 Press TV or TV/CABLE (the button
name differs depending on the area).
2 Press SYSTEM MENU.
3 Press X/x to select “ATTENUATE,”
then press or c.
4 Press X/x to select a setting, then
press .
• “ATT ON”: You can attenuate the input
level.
• “ATT OFF”: Normal input level.
5 Press SYSTEM MENU.
Downloaded From TheatreSystem-Manual.com Manuals