Do you have a question about the Sony DCR-TRV230 and is the answer not in the manual?
Procedure for safety verification after service completion.
Methods to prevent power shut-off during repairs.
Procedure for forced removal of a cassette when the unit does not eject.
Table detailing adjustments required after component replacement.
Adjusting AMP gain and offset for lens iris position detection.
Automatic adjustment of the inner focus lens flange back.
Automatic adjustment of flange back using chart and distant subjects.
Aligning lens optical axis with CCD imager for proper focus.
Adjusting color separation matrix for proper color reproduction.
Adjusting auto white balance output data for proper color.
Adjusting sensitivity of pitch and yaw sensors for shake correction.
Setting VCO free-run frequency for clear EVF screen.
Setting VCO free-run frequency for clear LCD screen.
Required instruments and general precautions for video adjustments.
Using the adjustment remote commander for setting coefficients.
List of electrical components used in the camcorder.