43
Advanced Recording Operations
Using the wide mode
ID-1 system
The ID-1 system sends aspect ratio (screen horizontal/vertical ratio) information (16:9,
4:3, or letter box) with video signals. If you connect a TV compatible with the ID-1
system, the screen size is automatically selected.
ID-2 system
The ID-2 system sends a copyright protection signal with ID-1 signals inserted between
video signals when you connect your camcorder to other equipment by an A/V
connecting cable.
If 16:9WIDE is set to ON (DCR-TRV240/TRV340 only)
The SteadyShot function does not work. If you set 16:9WIDE to ON in the menu settings
when the SteadyShot function is working, flashes and the SteadyShot function does
not function.
To Next Page
Loading...
Need help?
General