56
GB
Listening to non-preset radio
station
— Manual Tuning
1 Press FUNCTION + or – (or touch
TUNER/BAND on the unit) repeatedly
to select “TUNER FM” or “TUNER AM”.
2 Press TUNING + or – repeatedly to tune
in the desired station.
Note
The OSD does not appear on the TV screen except for
DVD function.
Tips
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
• When an FM stereo program has static noise, press
FM MODE repeatedly until “MONO” appears.
There will be no stereo effect, but the reception will
improve.
• Press and hold TUNING + or – in step 2 above. The
frequency indication changes and scanning stops
when the system tunes in a station (Automatic
Tuning).
• To record the radio programs, use manual recording
(pages 59 and 67).
To Next Page
Loading...
