Sony DSC-RX100M7 - Page 24

4-2-5. MS-1040 Board
Notes on Assembly
[ 4 ]
[ 3 ] two screws
#247 (M1.4 X 2.5)
(0.12 ± 0.01 N·m)
(Note 1)
[ 1 ] Heat sheet (B) (64210)
[ 2 ] Heat sheet (U) (64200)
[ 8 ] MS insulating
sheet (A)
[ 10 ] MS-1040 board
[ 7 ] MS GND sheet (64210) LE
[ 5 ] FP-2423 flexible board
[ 9 ] MS GND sheet (64200)
[ 6 ] SY-MS protect sheet (64210)
Refer to "Notes on Assembling the
Heat Sheet (U) (64200) and Heat
Sheet (B) (64210)".
Refer to "Notes on Assembling the
Heat Sheet (U) (64200) and Heat
Sheet (B) (64210)".
Refer to "Notes on Assembling the
MS GND sheet (64200)".
Refer to "Notes on Assembling the
MS GND sheet (64210) LE".
Refer to "Notes on Assembling the
SY-MS Protect Sheet (64210)".
Refer to "Notes on Assembling the
FP-2423 Flexible Board".
This screw cannot be reused. Discard the screw removed
once in servicing. Instead, use a new screw.
Note 1
このねじは再利用す
ることができません。
サービス対応時に一度でも外した場合は新品のねじと交換
してください。
Heat Sheet (B) (64210)
MS-1040 board
Heat Sheet (U) (64200)
Notes on Assembling the Heat Sheet (U) (64200), Heat Sheet (B) (64210)
Attach the heat sheet (U) (64200) and the heat sheet (B) (64210) as shown in figure.
Lines
Line
SYSSET
2023/12/2903:11:18(GMT+09:00)