99
Troubleshooting
Zoom does not work. • The zoom magnification cannot be changed
while shooting movies (MPEG Movie).
• You cannot use the zoom while a wide end
conversion lens is mounted.
—
—
Smart zoom does not
function.
• You cannot use smart zoom while shooting
movies (MPEG Movie).
• [Smart Zoom] is set to [Off] in the SET UP
settings.
• The LCD screen is turned off.
• The image size is set to [5.0M] or [4.5M(3:2)].
—
p Set [Smart Zoom] to [On] (pages 39 and 115).
p Turn on the LCD screen (page 28).
p Set image size to other settings except [5.0M] and [4.5M(3:2)]
(page 18).
The image is too dark. • You are shooting a subject with a light source
behind the subject.
• The brightness of the LCD screen is too low.
p Adjust the exposure (page 49).
p Adjust the brightness of the LCD screen (pages 39 and 117).
The image is too bright. • You are shooting a spotlighted subject in a dark
location such as on a stage.
• The brightness of the LCD screen is too bright.
p Adjust the exposure (page 49).
p Adjust the brightness of the LCD screen (pages 39 and 117).
Vertical streaks appear
when you are shooting a
very bright subject.
• The smear phenomenon is occurring. p This is not a malfunction.
Noise appears in the
image when you view the
LCD screen in a dark
place.
• The camera is functioning to increase the
visibility of the LCD screen by temporarily
brightening the image under conditions of low
illumination.
p There is no effect on the recorded image.
Symptom Cause Solution
To Next Page
Loading...
