Sony DSC-V1 - Stroboscope Block; Board; Sy-089 Board

2-6
DSC-V1
Position of claws
2 Screw (P2)
4 Rotate the condenser holder.
6 Stroboscope block
Stroboscope block
5 Claw
3
Note: When removing condenser holder,
be careful not to break the claw.
Condenser holder
Stopper
1 Connector
(CN751)
2-8. SY-089 BOARD
6 SCREW (M1.7)
5 Connector (CN301)
4 Connector (CN701)
3 Connector
(CN705)
2 Connector (CN151)
1 Connector
(CN752)
9 SY-089 board
8 Claw
7 Claw
2-7. STROBOSCOPE BLOCK