5-7
Ref. No. Part No. Description Ref. No. Part No. Description
5-2. ELECTRICAL PARTS LIST
DSC-W100_L2
CD-628 DC-105 MC-162 RL-064 ST-146
A-1178-700-A CCD BLOCK ASSY (Note 1)
(Not supplied) CD-628 FLEXIBLE BOARD, COMPLETE
*******************************
(CD-628 flexible complete board and IC001 are not supplied,
but they are included in CCD block assy.)
< CAPACITOR >
C002 1-127-715-91 CERAMIC CHIP 0.22uF 10% 16V
C005 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C007 1-100-505-91 CERAMIC CHIP 0.1uF 20% 16V
C008 1-164-943-81 CERAMIC CHIP 0.01uF 10% 16V
< IC >
IC001 (Not supplied) ICX476CQZ-13 (Note 1)
IC002 8-753-230-85 IC CXA3691EN-T9
< TRANSISTOR >
Q002 6-550-119-01 TRANSISTOR DTC144EMT2L
< RESISTOR >
R004 1-218-949-11 RES-CHIP 470 5% 1/16W
R005 1-218-953-11 RES-CHIP 1K 5% 1/16W
R010 1-218-981-11 RES-CHIP 220K 5% 1/16W
0 A-1178-825-A DC-105 FLEXIBLE BOARD, COMPLETE
*******************************
< BATTERY TERMINAL >
0 BT901 1-780-061-21 BATTERY TERMINAL BOARD
< FERRITE BEAD >
FB001 1-414-228-11 INDUCTOR, FERRITE BEAD
0 FB002 1-469-324-21 FERRITE, EMI (SMD) (2012)
0 FB003 1-469-324-21 FERRITE, EMI (SMD) (2012)
< JACK >
0 J001 1-817-331-11 DC JACK 5P (DC IN)
< RESISTOR >
R001 1-216-821-11 METAL CHIP 1K 5% 1/10W
A-1178-824-A MC-162 FLEXIBLE BOARD, COMPLETE
*******************************
(CN001 (multi connector) is not supplied, but this is included in
MC-162 flexible complete board.)
< CONNECTOR >
CN001 (Not supplied) CONNECTOR, MULTIPLE (SOCKET)
< DIODE >
D001 6-500-776-01 DIODE MAZW068H0LS0
D002 6-500-776-01 DIODE MAZW068H0LS0
D003 8-719-083-91 DIODE EDZ TE61 6.8B
< LINE FILTER >
LF001 1-456-583-21 COMMON MODE CHOKE COIL
< RESISTOR >
R004 1-500-283-11 INDUCTOR, FERRITE BEAD (Note 2)
R005 1-500-283-11 INDUCTOR, FERRITE BEAD (Note 2)
A-1178-698-A CABINET (T) BLOCK ASSY (S) (SILVER)
A-1178-699-A CABINET (T) BLOCK ASSY (B) (BLACK)
(Not supplied) RL-064 FLEXIBLE BOARD, COMPLETE
*******************************
(RL-064 flexible complete board and S002 (shutter) are not supplied,
but they are included in cabinet (T) block assy.)
< SPEAKER >
SP901 1-826-403-11 LOUD SPEAKER (1.0CM)
< BATTERY >
0 BT001 1-756-539-11 BATTERY, LITHIUM SECONDARY
< DIODE >
D001 6-500-252-01 DIODE SML-512WWT86
(FLASH CHARGING/RECORD)
D002 6-501-030-01 DIODE SML-412MWT86 (POWER)
D003 6-501-030-01 DIODE SML-412MWT86
(AE/AF LOCK/SELF-TIMER)
< RESISTOR >
R001 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
< SWITCH >
S001 1-786-157-31 TACTILE SWITCH (POWER)
S002 (Not supplied) TACTILE SWITCH (SHUTTER)
S003 1-786-179-31 SWITCH, PUSH (1KEY) (T (ZOOM))
S004 1-786-157-11 SWITCH, TACTILE (N (PLAYBACK))
S005 1-786-180-31 SWITCH, PUSH (1KEY) (W (ZOOM)/INDEX)
0 A-1178-823-A ST-146 FLEXIBLE BOARD, COMPLETE
*******************************
0 1-479-690-11 FLASH UNIT
< CAPACITOR >
C002 1-100-611-91 CERAMIC CHIP 22uF 20% 6.3V
C003 1-100-506-91 CERAMIC CHIP 1uF 20% 6.3V
C004 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
0 C005 1-100-758-11 CERAMIC CHIP 0.047uF 10% 250V
• Refer to page 5-1 for mark 0.
Note 2: Ferrite beads are mounted to the location where
R004 and R005 are printed.
Note 1: Be sure to read “Precautions for Replacement of
Imager” on page 4-3 when changing the imager.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
To Next Page
Loading...
