Using the viewing function
103
To return to the normal playback screen
Press the button.
Note
• When you copy rotated images to a computer, “PMB” contained on the CD-ROM
(supplied) can display the rotated images correctly. However, the images may not be
rotated depending on the software.
An image can be enlarged for closer examination. This is convenient to
check the focus condition of a recorded image.
Rotating an image
1 Fn button t [Rotate]
2 Press the center of the control button.
The image is rotated counter-clockwise. When you want to do another
rotation, repeat step 2.
• Once you rotate the image, the image is played back in the rotated position,
even if you turn off the power.
Enlarging images
1 Display the image you want to
enlarge, then press the button.
button
2 Zoom the image in or out with the
control dial.
To Next Page
Loading...
Need help?
General
