124
Setting the LCD monitor
The brightness of the LCD monitor is automatically adjusted to the
surrounding lighting conditions using the light sensor (page 35).
You can set the brightness of the LCD monitor manually.
MENU button t 1 t [LCD brightness] t [Manual] t
Select the desired setting
Notes
• When it is set to [Auto], do not cover the light sensor with your hand and so on.
• When using the camera with the AC-PW10AM AC Adaptor (sold separately), the
brightness of the LCD monitor is always set to the brightest setting even if you select
[Auto].
You can check the recorded image on the LCD monitor right after the
shooting. You can change the displayed time.
MENU button t 1 t [Auto review] t Select the desired
setting
Note
• In auto review, the image will not be displayed in the vertical position even if
[PlaybackDisplay] is set to [Auto rotate] (page 102).
Setting the brightness of the LCD monitor manually
Setting the displayed time of the image right after shooting
(Auto review)
To Next Page
Loading...
