If the ND1 or ND2 indicator
flashes, see page 46.
Set the POWER switch to
CAMERA while pressing the
small green button.
Slide OPEN
back in the ^
mark direction
to open the
LCD panel.
Press START/
STOP. Your
camcorder
starts
recording. To
stop recording,
press START/
STOP again.
Viewfinder ____
When the LCD panel
is closed, use the
viewfinder placing
your eye against its
eyecup.
Remove the hood cap.
NOTE
Do not pick up your camcorder by
holding the viewfinder, the LCD panel,
the battery pack, or the microphone.
To Next Page
Loading...
Need help?
General