30GB
E:\Works\5003283211\5003283211DSXB700WUC\01GB-DSX-B700Wxx\030CD.fm masterpage: Left
DSX-B700W/DSX-B700
5-003-283-00(1)
Pandora® operation (US/Canada and
Walmart models only)
Pandora® connection is not possible.
Shut down the Pandora® application on the
mobile device, and then launch it again.
Messages
The following messages may appear or flash during
operation.
INVALID
The selected operation could be invalid.
READ: Now reading information.
Wait until reading is complete and playback
starts automatically. This may take some time
depending on the file organization.
(underscore): The character cannot be
displayed.
For USB device playback:
HUB NO SUPPORT: USB hubs are not supported.
IPOD STOP: iPod playback has finished.
Operate your iPod/iPhone to start playback.
NOT SUPPORT ANDROID MODE
A USB device not supporting AOA (Android Open
Accessory) 2.0 is connected to the unit while [USB
MODE] is set to [ANDROID].
Set [USB MODE] to [MSC/MTP] (page 20).
USB ERROR: The USB device cannot be played.
Connect the USB device again.
USB NO DEVICE: A USB device is not connected or
recognized.
Make sure the USB device or USB cable is securely
connected.
USB NO MUSIC: There is no playable file.
Connect a USB device containing playable files
(page 25).
USB NO SUPPORT: The USB device is not
supported.
For details on the compatibility of your USB
device, visit the support site on the back cover.
USB OVERLOAD: The USB device is overloaded.
Disconnect the USB device, then press SRC to
select another source.
The USB device has a fault, or an unsupported
device is connected.
For RDS operation (Europe models only):
NO AF: No alternative frequencies.
Press / (SEEK –/+) while the program
service name is flashing. The unit starts searching
for another frequency with the same PI (program
identification) data ([PI SEEK] appears).
NO PI: No program identification. The selected
station has no PI (program identification) data.
Select another station.
NO TP: No traffic programs.
The unit will continue searching for available TP
stations.
For BLUETOOTH function:
BT AUDIO NO DEVICE: The BLUETOOTH device is
not connected or recognized.
Make sure the BLUETOOTH device is securely
connected, or the BLUETOOTH connection is
established with the BLUETOOTH device.
FILE ERROR: The selected operation could not be
performed.
Wait for a while, then try again.
NO INFO: The phone number is hidden by the
caller.
NO SUPPORT: The selected operation is not
allowed or supported.
Make sure the BLUETOOTH device is supporting
HFP (Handsfree Profile).
UNKNOWN: A name or phone number cannot be
displayed.
For “Sony | Music Center” operation:
APP -----------: A connection with the application is
not established.
Make the “Sony | Music Center” connection again
(page 18).
APP DISPLAY: A screen setting display of the
application is open.
Exit the screen setting display of the application
to enable button operation.
APP LIST: The contents list of the USB/iPod is open.
Exit the list of the application to enable button
operation.
APP MENU: A setting display of the application is
open.
Exit the setting display of the application to
enable button operation.
010COV.book Page 30 Monday, February 4, 2019 2:03 PM
To Next Page
Loading...
