Sony DSX-B700W - Installation and Maintenance; Mounting Unit and Fuse Replacement

41GB
E:\Works\5003283211\5003283211DSXB700WUC\01GB-DSX-B700Wxx\030CD.fm masterpage: Right
DSX-B700W/DSX-B700
5-003-283-00(1)
2 Mount the unit onto the bracket .
Note
If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.
Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
When mounting this unit to the preinstalled
brackets of your car, use the mounting screws  in
the appropriate screw holes based on your car:
T for TOYOTA and N for NISSAN.
Note
To prevent malfunction, install only with the mounting
screws .
For details, see “Resetting the Unit” (page 8).
When replacing the fuse, be sure
to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse blows
again after replacement, there
may be an internal malfunction. In such a case,
consult your nearest Sony dealer.
Resetting the unit



To dashboard/center console
Parts supplied with
your car

Bracket
Bracket
Fuse replacement
Fuse (10 A)
010COV.book Page 41 Monday, February 4, 2019 2:03 PM