Need help?Do you have a question about the Sony DTC-77ES and is the answer not in the manual?
Power| power requirements | 120 V AC, 60 Hz |
|---|---|
| power consumption | 37W |
| remote control power requirements | 3V DC |
Audio Features| sampling frequency | 48 kHz, 44.1 kHz, 32 kHz |
|---|---|
| frequency response standard | 2-22, 000 Hz (+0.5 dB) |
| frequency response long-play mode | 2-14, 500 Hz (+0.5 dB) |
Weight and Dimensions| dimensions | 470x135x350 mm |
|---|---|
| weight | 11 kg |
Procedure for checking AC leakage from exposed metal parts to earth ground.
Detailed description of the unit's capabilities and technologies.
Identifies and explains front panel and remote controls.
Explains functions exclusive to the remote commander.
Illustrates the overall signal flow and component interactions.
Step-by-step guide to set the unit's internal clock accurately.
Pre-adjustment notes, test tapes, initial settings, and test mode activation.
Procedures for adjusting mechanical guides and tape path alignment.
Steps for adjusting end sensor, torque, back tension, and tape path fine-tuning.
Procedures for checking RF signal waveforms and adjusting pilot signals.
High-level functional block diagram of the entire system.
Component placement diagrams for various circuit boards.
Detailed circuit diagrams for different sections of the unit.
Lists components for the RF amplifier (REC/PB) board.
Lists components for RF amplifier (PB) and Audio boards.
To Next Page
