Need help?Do you have a question about the Sony DTC-700 and is the answer not in the manual?
Warnings about moisture, shock hazards, FCC compliance, and potential interference.
Guidelines for safe operation, electrical safety, and handling.
Recommendations for installation and handling moisture condensation issues.
How to use the cassette's safety tab to prevent accidental recording.
Turning on power, setting timer, and selecting input sources.
Steps to start recording, pause, and adjust analog input levels.
Stopping recording, designating program numbers, and troubleshooting issues.
Detailed guide on adjusting input levels and handling overload.
How to use end search to locate the last recorded point for new recordings.
Steps and conditions for automatically writing start IDs during recording.
Detailed procedures for writing start IDs manually during recording and playback.
How to finely adjust the position of a written start ID using the rehearsal function.
Procedure for erasing a specific start ID from the tape.
Steps for automatically writing program numbers during recording.
Procedure to automatically renumber program numbers from the beginning of the tape.
Adjusting the position of start IDs and program numbers.
Procedure for erasing a program number, which also erases the associated start ID.
Procedures for writing skip IDs during recording and playback.
Procedure for erasing a skip ID from the tape.
Steps for writing an end ID during the recording process.
Procedure for writing an end ID during playback.
Procedure for erasing an end ID from the tape.
Turning on the unit, loading cassette, and starting playback.
How to start and operate the music scan feature to listen to selection beginnings.
Procedures for cleaning the cabinet and the recording/playback head.
Common issues related to tape loading, movement, sound, and recording.
Troubleshooting for sub code writing, search function, and program number issues.
To Next Page
General
