Amplifier section
European model:
DIN power output (rated):75 + 75 watts (6 ohms at
1kHz, DIN)
Continuous RMS power output (reference):
100 + 100 watts (6 ohms
at 1 kHz, 10% THD)
at
at
1kHz, 10% THD)
at 1 kHz, 10% THD)
Music power output (reference):
200 + 200 watts (6 ohms
The following measured at AC 120, 220, 240 V AC,
50/60 Hz (Australian model at 240 V AC, 50/60 Hz)
DIN power output (rated): 100 + 100 watts (6 ohms
1kHz, DIN)
Continuous RMS power output (reference):
140 + 140 watts (6 ohms
Inputs
MD (VIDEO) IN (phono jacks):
Voltage 450 mV/250 mV,
impedance 47 kilohms
Outputs
PHONES (stereo mini jack):
Accepts headphones of
8 ohms or more
MD (VIDEO) OUT (phono jacks):
Voltage 250 mV,
impedance 1 kilohms
FRONT SPEAKER: Use only the supplied
speaker SS-WZ5/WZ5E
SUB WOOFER (Except for European model):
Voltage 320mV,
impedance 1 kilohms
Tape deck section
Except for European model:
Recording system 4-track 2-channel, stereo
Frequency response 50 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassettes
General
Power requirements
European model: 230 V AC, 50/60 Hz
Australian model: 230 – 240 V AC, 50/60 Hz
TW model: 120 V AC, 50/60 Hz
Other models: 120 V, 220 V or
230 – 240 V AC, 50/60 Hz
Adjustable with voltage
selector
Power consumption
European model: 150 watts
0.3 watts (at the Power
Saving Mode)
Except for European model:
180 watts
Dimensions (w/h/d)
Amplifier/Tape deck:
Amplifier/Tape deck
Approx. 255 × 135 ×
330 mm
Mass
European model: Approx. 6.0 kg
Except for European model:
Approx. 6.3 kg
Design and specifications are subject to change
without notice.
To Next Page
Need help?
General
