Sony WALKMAN WMD-DT1 User Manual

SERVICE MANUAL
Tape
Sampling frequency
Quantization
Frequency response
Wow and flutter
Output
Power output |
Power requirements
Battery life
SPECIFICATIONS
Digital audio tape Dimensions
48 kHz, 44.1 kHz, 32 kHz
Standard: 16-bit linear Mass
Long-play mode: 12-bit Non linear
Standard: Fs 48 kHz 20 — 22,000 Hz (+1.0 dB/-1.5 dB)
Fs 44.1 kHz 20 — 20,000 Hz (+1.0 dB/-1.5 dB)
Fs 32 kHz 20 — 14,500 Hz (+1.0 dB/-1.5 dB)
Long-play mode:
Fs 32 kHz 20 - 14,500 Hz (+ 1.0 dB/- 1.5 dB)
Below measurable limit (less than + 0.001% W.PEAK)
REMOTE/PHONES: nine pole jack
PHONES: stereo minijack
load impedance 8 — 300 Q
5 mW +5 mW 16Q
3 VDC
Two LR6 (size AA) batteries
Two rechargeable batteries (not supplied)
DC IN 3V jack accepts:
« Sony AC-E3OL AC power adaptor (not supplied) for
use on:
U.S.A. and Canada _| 120 V AC, 60 Hz
UK. | 240 V AC, 50 Hz
European countries 220 ~ 230.V AC, 50 Hz
Other countries 120 V AC, 50 Hz or 220 V
AC, 60 Hz
* Sony DCC-E130L car battery cord (not supplied) for
use on 12 V car battery
Battery Playback
Sony alkaline AM3 (N) Approx. 4 hours
Sony rechargeable NC-AA-2 | Approx. 1.5 hours
Do not use the manganese batteries with this unit.
WMD-DT1
8%
US Model
Canadian Model
AEP Model!
Tape
Kman
MT-WMDDT1-108
Approx. 116.3 x 28.5 x 69.5 mm (45/g x 11/g x 25/4 in.)
(w/h/d)
Approx. 250 g (8.9 02.)
incl. batteries, not incl. other accessories
Design and specifications subject to change without notice.
Optional Accessories
AC power adaptor AC-E30L
Battery charger kit BPK-800
Rechargeable battery NC-AA-2
Car connecting pack CPA-3
Car battery cord DCC-E130L
Stereo active speaker system SRS-88
Earphones (headphones) with micro plugs MDR-D55, MDR-D77
DAT cleaning cassette DT-10CL.
DIGITAL AUDIO TAPE PLAYER
SONTY.

Sony WALKMAN WMD-DT1 Specifications

General

Brand	Sony
Model	WALKMAN WMD-DT1
Category	Cassette Player
Language	English