To Next Page

To Previous Page

To receive items using Bluetooth

Make sure that the Bluetooth

function is on and is visible to other Bluetooth

devices.

2 The sending device now starts sending data to your device.

3 If prompted, enter the same passcode on both devices, or confirm the

suggested passcode.

4 When you are notified of an incoming file to your device, drag the status bar

downward and tap the notification to accept the file transfer.

5 Tap Accept to start the file transfer.

6 To view the progress of the transfer, drag the status bar downward.

7 To open a received item, drag the status bar downward and tap the relevant

notification.

To view files you have received using Bluetooth®

1 From your Homescreen, tap

2 Find and tap Settings > Bluetooth.

3 Press and select Show received files.

One-Touch Setup

You can use the One-Touch Setup function to automatically launch the setup of

several features that work wirelessly between two Xperia™ devices. For example, you

can use One-Touch Setup to launch the configuration of basic settings for Screen

Mirroring and Xperia Link™. Once you complete the setup, you only need one touch

every time to launch these features.

The One-Touch Setup function is activated using NFC. For more information about

setting up Screen Mirroring, Media Server, NFC, and Bluetooth® on your device,

refer to the relevant sections of the User guide.

To start One-touch setup on your device

1 From your Homescreen, tap

2 Find and tap Settings > Xperia™ Connectivity > One-touch setup. The NFC

function is automatically turned on.

3 Make sure the NFC function on the other Xperia™ device is turned on.

4 Make sure the screens of both devices are unlocked and active.

5 Hold the two devices together so that the NFC detection area of each device

touches the other. The One-touch setup function launches automatically.

Both devices must support the One-touch setup function.

117

Sony E6553 User Manual

Questions and Answers: