To switch the radio sound to the speaker
1
When the radio is open, press .
2
Tap Play in speaker.
To switch the sound back to the wired headset or headphones, press and tap Play in
headphones.
To Identify a Song on the FM Radio Using TrackID™
1
While the song is playing on your device's FM radio, tap , then select
TrackID™.
2
A progress indicator appears while the TrackID™ application samples the song. If
identification is successful, you are presented with a result or a list of possible
results.
3
To return to the FM radio, tap
.
The TrackID™ application and the TrackID™ service are not supported in all countries or
regions, nor by all networks or service providers.
Favorite radio channels
To Save a Channel as a Favorite
1
When the radio is open, navigate to the channel that want to save as a favorite.
2
Tap
.
3
Enter a name and select a color for the channel, then press
Save
.
To listen to a favorite radio channel
1
Tap .
2
Select an option.
To Remove a Channel as a Favorite
1
When the radio is open, navigate to the channel that you want to remove.
2
Tap
, then tap
DELETE
.
Radio Sound Settings
To switch between mono and stereo sound mode
1
When the radio is open, press
.
2
Tap Enable stereo sound.
3
To listen to the radio in mono sound mode again, press
and tap
Force mono
sound.
To select the radio region
1
When the radio is open, press
.
2
Tap Set radio region.
3
Select an option.
100
This is an internet version of this publication. © Print only for private use.