Sony E6883 - Selecting a SIM card for data traffic

To Set a Data Usage Warning
1
Make sure cellular data traffic is turned on.
2
From your Home screen, tap .
3
Find and tap Settings > Data usage > Billing cycle.
4
To set the warning level, tap Data warning, enter the desired data limit and tap
SET. You receive a warning notification when the amount of data traffic reaches
the level you set.
To Set a Cellular Data Limit
1
Make sure cellular data traffic is turned on.
2
From your Home screen, tap
.
3
Find and tap Settings > Data usage.
4
Tap the slider beside Set data limit.
Once your cellular data usage reaches the set limit, cellular data traffic on your device gets
turned off automatically.
To Control the Data Usage of Individual Applications
1
From your Home screen, tap
.
2
Find and tap Settings > Apps.
3
Tap the application that you want to control, then tap Data usage.
The performance of individual applications may be affected if you change the related data
usage settings.
To Check Your Data Usage
1
From your Home screen, tap .
2
Find and tap
Settings
>
Data usage
.
3
Find and tap Cellular data usage to view information about the amount of data
transferred via cellular data connection.
4
To view information about the amount of data transferred via Wi-Fi connection, tap
the
Wi-Fi data usage
.
Selecting a SIM card for data traffic
Either of the two SIM cards inserted in your device can handle data traffic, but only one
SIM card can be selected to handle data at any given time. You can select the SIM card
to use for data traffic during the initial setup of your device, or you can select or change it
later via the Settings menu.
To Change the SIM Card Used for Data Traffic
1
From your
Home screen
, tap
.
2
Find and tap Settings > Dual SIM > Mobile data traffic.
3
Select the SIM card that you want to use for data traffic.
For higher data speeds, select the SIM card that supports the fastest mobile network, such as
3G or LTE.
Selecting Cellular Networks
Your device supports the use of two different networks at the same time. You can select
from the following network mode combinations when two SIM cards are inserted in your
device:
•
One WCDMA network
•
One GSM network
•
One WCDMA and one GSM network
•
One LTE, one WCDMA, and one GSM network
For each SIM card, you can set your device to switch automatically between cellphone
networks depending on which cellphone networks are available where you are. You can
53
This is an internet version of this publication. © Print only for private use.