Help Guide
Shotgun Microphone
ECM-B10
Specifications
Design and specifications are subject to change without notice.
5-036-505-11(1)
Copyright 2021 Sony Corporation
Type Back electret condenser type
Frequency response 40 Hz to 20 000 Hz
Pickup pattern Super-directional / unidirectional / omnidirectional (selectable)
Front sensitivity
*1
-20 dBFS (0.1 Pa, 1 kHz)
Intrinsic noise
*1 *2
15 dB SPL or less (0 dB = 2×10
-5
Pa)
Wind noise
*1 *3
50 dB SPL or less (without the wind screen attached)
30 dB SPL or less (with the wind screen attached)
Maximum input sound pressure level
120 dB SPL
*1 *4
Dynamic range
*2
105 dB or more
Operation temperatures 0 °C to 40 °C (32 °F to 104 °F)
Storage temperatures -20 °C to +55 °C (-4 °F to +131 °F)
Dimensions (Approx.)
27.4 mm × 81.7 mm × 79.3 mm
(Width/Height/Depth)
(1 1/8 in. × 3 1/4 in. × 3 1/8 in.)
(excluding the wind screen and projecting parts)
Mass (Approx.) 72 g (2.6 oz)
Acquired by setting the AUTO/MAN switch and the ATT switch to “AUTO” and “10dB,” respectively.
*1
Acquired by setting the DIGITAL/ANALOG switch to “DIGITAL.”
*2
Equivalent sound pressure level value converted from the average value of the noise that is output from the microphone when a wind velocity of
2 m/sec. is applied. (0 dB = 2×10
-5
Pa)
*3
Equivalent sound pressure level value converted from the input level value that is acquired when 1% waveform distortion is produced by 1 kHz
output signals from the microphone. (0 dB = 2×10
-5
Pa)
*4
To Next Page
Loading...
