Sony ECM-B10 - User Manual

Help Guide
Shotgun Microphone
ECM-B10
Use this Help Guide when you have issues or questions on how to use your shotgun microphone.
5-036-505-11(1)
Copyright 2021 Sony Corporation
Supported camera models
This unit is a microphone compatible with the Multi Interface Shoe.
For camera models compatible with this unit, view here. (Another window will open.)
In combination with any camera model that is not listed on the website, the unit does not work.
Identifying the parts
Preparations
Unpacking
Attaching/removing to/from the camera
About the pickup pattern and the frequency response
About this unit
Notes on use
Specifications
Trademarks
When the message “This accessory is not supported by the device and cannot be used.” is displayed on
the camera:
1

Sony ECM-B10 Specifications

General

Brand	Sony
Model	ECM-B10
Category	Microphone
Language	English

Summary

Identifying the parts

Top, Side, and Bottom

Describes the physical components on the top, side, and bottom of the microphone unit.

Back

Details the controls and connectors located on the back of the microphone unit.

About the wind screen

Explains how to use the wind screen to reduce wind or breath noise.

Unpacking

Attaching;removing to;from the camera

About the pickup pattern and the frequency response

Super-directional pickup pattern

Illustrates the directional sensitivity of the microphone in super-directional mode.

Super-directional frequency response

Shows the frequency response characteristics for the super-directional pickup pattern.

Unidirectional pickup pattern

Displays the pickup pattern for the unidirectional setting.

Unidirectional frequency response

Presents the frequency response for the unidirectional pickup pattern.

Omnidirectional pickup pattern

Illustrates the pickup pattern in omnidirectional mode.

Omnidirectional frequency response

Details the frequency response characteristics for the omnidirectional pickup pattern.

Notes on use

Specifications

Trademarks

When the message “This accessory is not supported by the device and cannot be used.” is displayed on the camera: