A moulded plug complying with BS 1363 is fitted to this equipnlent for your
safety and convenience.
Should the fklse ill the phlg supplied need to be replaced, a 5 AMP fklse
approved by ASTA or BSI to BS 1362_ (i.e., marked with @ or _ mark)
nltlSt be used.
If tile plug supplied with this equipment has a detachable fklse cover, be
sure to attach the f\/se cover after you change the fk/se.Never use the plug
without the fklsecover. If you shouM lose the f\/se cover_ please contact
your nearest Sony sel_'ice station.
Directive: EMC Directive 89/336/EEC.
92/31/EEC
This equipment complies with the EMC regulations when used under tile
following circumstances:
• Residential area
• Business district
• Light industry district
(This equipment complies with the EMC standard regulations EN55022 Class
B.)
The electromagnetic fields at tile specific fiequencies may influence the picture
of this camera.
4-GB
To Next Page
Loading...
