Sony GP-VPT2BT User Manual

Help Guide
Shooting Grip With Wireless Remote Commander
GP-VPT2BT
Mounting the camera
Mount a camera to this unit.
Install the battery pack and a memory card in the camera before mounting to this unit.
Note
Be careful not to drop the camera or this unit.
When you are finished with using this unit, remove it from the camera and keep it in the supplied pouch. Before removing the unit
from the camera, turn the LOCK switch to the “LOCK” position.
5-011-845-11(1) Copyright 2019 Sony Corporation
Fit the camera mounting screw on this unit into the tripod screw hole on the bottom of the camera (
) ,
and then turn the camera mounting wheel to secure the camera (
).
1
11

Sony GP-VPT2BT Specifications

General

Purpose	Digital/film cameras
Product color	Black
Number of legs	3 leg(s)
Tilt angle range	-90 - 80 °
Number of leg sections	1
Maximum weight capacity	1.5 kg

Weight and Dimensions

Height (max)	- mm