Sony GP-VPT2BT - Inserting the Battery

Help Guide
Shooting Grip With Wireless Remote Commander
GP-VPT2BT
Inserting the battery
Insert the supplied lithium coin cell battery (CR2032) into the battery chamber of this unit.
5-011-845-11(1) Copyright 2019 Sony Corporation
Push the tab (
) on the battery chamber lid to the left and hold the tab, push down the other tab ( ) on
the lid, and then remove the battery chamber lid.
1
Insert the supplied lithium coin cell battery.
Insert the battery so that the + terminal is facing upward.
(+ on the battery chamber indicates the direction of the battery.)
2
Replace the battery chamber lid.
3
7