Sony HCD-GS10 - Front Panel Assy; PANEL Board

8
HCD-GS10/GS30DAB
9 screw
(+KTP2 3 × 8 )
q; screw
(+KTP2 3 × 8 )
1 screw
(+BVTP 3 × 8 )
8 two screws
(+BVTP 3 × 10 )
2 screw
(+BVTP 3 × 8 )
3 wire (flat type)
5core (CN601)
7 wire (flat type)
25core (CN121)
5 connector
(CN105)
6 connector
(CN104)
qa front panel
assy
4 Remove the two harnesses
that is fixed on the clamp.
When assembling,
clamp the two harnesses with
a lead pin.
PRECAUTION DURING
CONNECTOR INSTALLATION
MAIN board
lead pin
lead pin
harness
harness
9 wire (flat type)
25core (CN712)
q; PANEL board
8 claw
4 two screws
(+BVTP 2.6 × 8 )
6 KEY board
2 knob (VOL)
3 ring (VOL)
5 connector
(CN701)
7 eleven screws
(+BVTP 2.6 × 8 )
9 wire (flat type)
29core (CN712)
1 two foot (felt)
(UK)
3-4. FRONT PANEL ASSY
3-5. PANEL BOARD
Ver. 1.2