To Next PageTo Next Page
Need help?Do you have a question about the Sony HCD-HDX466 and is the answer not in the manual?
Details power output and harmonic distortion for US models and other models.
Lists analog input specifications such as sensitivity for TV/VIDEO and AUDIO inputs.
Describes analog output specifications, including headphone jack compatibility.
Lists model names that utilize a similar DVD mechanism for reference.
Specifies the type of DVD mechanism used in the unit for technical reference.
Identifies the optical pick-up block part number for service purposes.
Provides the approximate physical dimensions of the unit in inches and millimeters.
States the approximate weight of the unit in pounds, ounces, and kilograms.
Specifies the voltage and frequency required for the unit's power supply.
Details the power consumed when the unit is on and in standby mode.
Precautions for handling the optical pick-up block to prevent electrostatic discharge damage.
Instructions for safely checking the laser diode emission, emphasizing distance.
Information on the characteristics and handling of unleaded solder used on specific boards.
Procedure to release the disc tray lock function, often for demonstration units.
Procedure to disable the demonstration play lock feature, allowing normal system shutdown.
Important note regarding the EEPROM replacement on the main board, advising whole board exchange.
Table listing model numbers and their corresponding part numbers for service identification.
Outlines the step-by-step procedure for disassembling the unit in a specific order.
Details the procedure for removing the main outer case of the unit to access internal components.
Describes the disassembly process for the front panel assembly, including buttons and display.
Procedure for removing the main circuit board, a key component for service.
Steps for disassembling the DVD mechanism deck assembly, including tray and motor components.
Procedure for removing the optical pick-up block assembly, a sensitive component.
Procedure to reset all settings to initial conditions, clearing preset data and returning to factory state.
Diagnostic mode to check the functionality of panel components like FL display, LEDs, and buttons.
Procedure to set or release the disc tray lock function, often used for security or demonstration purposes.
Procedure to prepare the unit for shipping or customer return, typically locking the DVD mechanism.
Setting to change the AM channel step between 9 kHz and 10 kHz for tuning.
Moves the optical pick-up and clears data for customer return, ensuring the unit is in an initial state.
Test mode for calibrating the automatic acoustic field using an external microphone.
Covers adjustments and measurements specific to the DVD playback system for optimal performance.
Relates to adjustments for the FM and AM tuner sections of the device for accurate reception.
Block diagram illustrating the RF servo and video signal processing sections of the unit.
Block diagram showing changer, HDMI, and DMPORT connections and signal flow.
Block diagram illustrating the audio signal processing and output paths.
Block diagram of the amplifier section, detailing signal flow to speakers and headphones.
Block diagram of the panel interface and power supply circuits, showing voltage distribution.
Diagram showing the physical location of various circuit boards within the unit for reference.
General
