To Next PageTo Next Page
Need help?Do you have a question about the Sony HCD-HDX285 and is the answer not in the manual?
General| Power Output | 100 W |
|---|---|
| Tuner | Yes |
| Disc Playback | CD |
| Connectivity | USB |
| Number of Discs | 1 |
| Playable File Formats | MP3, WMA |
| Total Power Output | 100 W |
| CD Player | Yes |
| USB Port | Yes |
| FM Tuner | Yes |
| AM Tuner | Yes |
| Remote Control | Yes |
| Functions | CD Playback, FM/AM Tuner, USB Playback |
| Tuner Bands | AM/FM |
| Type | Mini Hi-Fi System |
| Speaker Configuration | 2.0 |
Details power output and total harmonic distortion for the US model.
Specifies RMS output power for surround and stereo modes for specific models.
Specifies RMS output power for surround and stereo modes for specific models.
Describes methods to measure AC leakage current from exposed metal parts to earth ground.
Lists causes and corrective actions for service numbers appearing on the display.
Provides essential notes for servicing the unit, including handling precautions.
Details various test modes for checking functions and diagnosing issues.
Procedures for performing electrical adjustments to ensure proper operation.
Illustrates the functional blocks and signal paths within the system.
Precautions for handling the optical pick-up block and base unit, including ESD.
Lists causes and corrective actions for service numbers appearing on the display.
Details the types of discs (DVD VIDEO, VIDEO CD, Super Audio CD, CD, DATA CD/DVD) that the system can play.
Crucial safety precautions for removing the optical pick-up block, including bridging.
Identifies controls and explains indications on the front panel display.
Details the various jacks and connectors on the rear panel for different model variants.
Describes the buttons and their functions on the remote control for specific models.
Describes the buttons and their functions on the remote control for specific models.
Lists specific components and their corresponding disassembly steps and page references.
Instructions for removing the S-AIR-CON board, including cable and connector details.
Procedure for removing the S-AIR INCLUDE board, detailing screws and wires.
Steps for disassembling the front panel, including removing the tray and connecting wires.
Procedure for removing the DVD mechanism deck block, including wire precautions.
Precautions and steps for removing the optical pick-up block from the DVD mechanism deck.
Procedure for removing the DVD mechanism deck, including wire precautions.
Steps for removing the main board, detailing screws, connectors, and heatsinks.
Detailed steps for removing the optical pick-up block, including insulators and screws.
Important precautions for installing cams (stocker), aligning gear holes and grooves.
Precautions and steps for installing the rotary encoder, aligning marks and gears.
How to perform a cold reset to clear all data and return the unit to initial conditions.
Procedures for display, version, and key test modes to check system functions.
Steps to access the DVD service mode and its main diagnosis menu.
Procedure for executing IOP measurement within the DVD service mode's drive manual operations.
Steps for manual adjustments like track balance, focus gain, and IOP measurement.
How to check emergency history, laser hours, and error codes.
Details the amplifier section, including digital power amps, stream processors, and speaker connections.
Shows the front panel display driver, key input, and power supply circuits, including regulators and transformers.
Schematic diagram for the power board, detailing power control ICs, regulators, and protection circuits.
Block diagrams for power supply ICs like STR-F6138/6168 and MR4020, detailing protection circuits.
Detailed pin descriptions for the R5F3640DDFAR system controller IC on the main board.
Continues the pin descriptions for the R5F3640DDFAR system controller, covering pins 98-100.
Detailed pin descriptions for the CXD9917R-A/CXD9927R-A RF AMP/DSP/HDMI IC.
Continues pin descriptions for IC1101, covering pins 210-256.
Detailed pin descriptions for the BH2210FV-E2 changer controller IC on the Seripara board.
Detailed pin descriptions for the BH2210FV-E2 audio/video controller IC on the Seripara board.
Detailed pin descriptions for the BU2099FV LED driver IC on the Key board.
Shows the exploded view of the optical pick-up section, including holder, block, and flat cable.
