Sony HCD-XB200 User Manual

HCD-DR3/DR330/XB200
AEP Model
UK Model
HCD-XB200
E Model
HCD-DR3/DR330
Australian Model
HCD-DR3
SERVICE MANUAL
MICROFILM
Continued on next page
SPECIFICATIONS
COMPACT Hi-Fi STEREO SYSTEM
SPECIFICATIONS
HCD-DR3/DR330/XB200 is the tuner, deck,
CD and amplifier section in LBT-DR3/
DR330/XB200.
Model Name Using Similar Mechanism HCD-G2500
Base Unit Type KSM-213ECM/C2NP
Optical Pick-up Type KSS-213E/C2N
Model Name Using Similar Mechanism NEW
Tape Transport Mechanism Type CWL-44-RR
CD
SECTION
TAPE
DECK
SECTION
Manufactured under license from Dolby Laboratories
Licensing Corporation.
“DOLBY” and the double-D symbol a are trademarks
of Dolby Laboratories Licensing Corporation.
Amplifier section
(LBT-XB200)
DIN power output (Rated) 70W + 70W
(6 Ω at 1 kHz DIN)
Continuous RMS power output (Reference)
80W + 80W
(6 Ω at 1 kHz, 10%
THD)
Music power output (Reference)
140W + 140W
(6 Ω at 1 kHz, 10%
THD)
(LBT-DR330/DR3)
The following measured at AC 110/220V, 60Hz ;
Continuous RMS power output (Reference)
85W + 85W
(6 Ω at 1 kHz, 10%
THD)
DIN power output (Rated) 70W + 70W
(6 Ω at 1 kHz, DIN)
The following measured at AC 120/240V, 60Hz ;
Continuous RMS power output (Reference)
100W + 100W
(6 Ω at 1 kHz, 10%
THD)
DIN power output (Rated) 80W + 80W
(6 Ω at 1 kHz, DIN)
Inputs
PHONO IN (phono jack):
sensitivity 3mV,
impedance 47 kΩ
MD/VIDEO IN (phono jacks):
sensitivity 250mV,
impedance 47 kΩ
Outputs
PHONOS (stereo phono jacks):
accepts headphones of 8 Ω
or more
MD/VIDEO OUT (phone jack):
voltage 250mV,
impedance 1 kΩ
SPEAKER: accepts impedance of 6 to
16 Ω
CD player section
System Compact disc and digital
audio system
Laser Semiconductor laser
(λ = 780 nm)
Emission
duration: continuous
Laser output Max. 44.6µW*
*This output is the value
measured at a distance of
200 mm from the objective
lens surface on the Optical
Pock-up Block with 7 mm
aperture.
Wavelength 780 – 790 nm
Frequency response 20Hz – 20kHz (±0.5 dB)
Signal-to-noise retio More than 90 dB
Dynamic range More than 90 dB
DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength 600 nm
Output Level –18 dBm
Tape deck section
Recording system 4-track 2-channel stereo
Frequency response (DOLBY NR OFF)
60 – 13,000 Hz (±3 dB),
using a Sony TYPE I
cassette
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tunr section
Tuning range 87.5 – 108.0 MHz
(50 kHz step)

Sony HCD-XB200 Specifications

General

Type	Mini Hi-Fi System
CD Player	Yes
Tuner	FM/AM
Remote Control	Yes
USB Playback	No
Bluetooth	No
Functions	CD, Radio
Power Output	100W (50W x 2)
Speaker Configuration	2-way

Summary

Specifications

Amplifier Section

Details of the amplifier's power output and impedance ratings.

CD Player Section

Technical specifications for the CD player, including laser and optical pick-up types.

Tape Deck Section

Specifications for the tape deck, including recording system and frequency response.

Tuner Section

Technical details for the FM/AM tuner, including tuning range and step.

Model Identification

Safety Precautions

Chip Component Replacement Notes

Guidelines for replacing chip components, warning about tantalum capacitors.

Flexible Circuit Board Repairing

Instructions for repairing flexible circuit boards, including soldering iron temperature.

General Information

Disassembly Procedures

Top Cover and Front Panel

Instructions for removing the top cover and front panel assemblies.

Main Section and Boards

Procedures for disassembling the main section and its associated boards.

Mechanism Decks

Instructions for removing the CD and Tape mechanism decks.

Chassis, Doors, and Base Unit

Steps for disassembling cassette doors, CD chassis, and the base unit.

Mechanical Adjustments

Torque Measurement

Specifications for torque measurements using torque meters and specified readings.

Electrical Adjustments

Deck Section Adjustments

Procedures for deck section adjustments, including azimuth and tape speed.

Tuner Section Adjustments

Procedures for AM and FM tuner adjustments, including tuning voltage, tracking, and FM level.

Front Panel Controls and Functions

CD Section Checks

Diagrams and Schematics

Circuit Board Locations

Diagram showing the location of various circuit boards within the unit.

Block Diagrams

Illustrates the main functional blocks and signal flow within the main section.

Section Schematics

Detailed schematic diagrams for the Tuner/CD, Main, Amp, CD Decoder, and Front sections.

Printed Wiring Boards

Printed wiring board layouts for various sections, showing component placement.

IC Pin Function Description - IC601

IC Block Diagrams - Main Board

IC Block Diagrams - Front and Amp Boards

Exploded Views

Top Cover Section

Exploded view of the top cover section, listing parts and their numbers.

CD Door Section

Exploded view of the CD door section, detailing components and their part numbers.

Panel Section

Exploded view of the panel section, listing numerous parts and their corresponding numbers.

Main Section

Exploded view of the main section, showing major assemblies like the main board and power supply board.

CD Mechanism Section

Exploded view of the CD mechanism section, detailing parts like motors, gears, and rollers.

Base Unit Section

Exploded view of the base unit section (KSM-213ECM), showing optical pick-up and motors.

Electrical Parts List

CD Decoder Section Components

Comprehensive list of electronic components for the CD decoder section, including capacitors, resistors, diodes, ICs, coils, transistors, and switches.