35
Menu List
PAINT Menu
<OPERATOR FILE> 16 READ (MS→CAM) Execute by ENTER. To read the operator file from
a “Memory Stick”
WRITE (CAM→MS) Execute by ENTER. To write the current settings of
the operator file items to a
“Memory Stick”
PRESET Execute by ENTER. To set the operator file items
to the preset values in internal
memory
FILE ID alphanumerics (max.16
characters)
Enter a comment for the
operator file to be written to a
“Memory Stick.”
See “To specify a character
string” on page 26.
CAM CODE HDCxxxx Camera code display only
DATE display only
<LENS FILE> 17
(U11)
FILE 1 1 to 16
xxxx... Lens file name display only
F.xx F-stop number of the lens display only
CENTER MARKER To set and store the center
marker position:
H POS: Increasing the value
moves it to the right.
V POS: Increasing the value
moves it downwards.
H POS 0 –20 to +20
V POS 0 –20 to +20
STORE CENTER Execute by ENTER.
Menu page No. Item⁄ Default Settings Remarks
<SW STATUS> P01 FLARE ON ON, OFF
GAMMA ON ON, OFF
BLK GAM OFF ON, OFF
KNEE ON ON, OFF
WHT CLIP ON ON, OFF
DETAIL ON ON, OFF
LVL DEP ON ON, OFF
SKIN DTL OFF ON, OFF
MATRIX OFF ON, OFF
<VIDEO LEVEL> P02
WHITE
[R] [G] [B] [M]
000
–99 to +99
R, G, B, and M (master) values
can be independently set.
(M cannot be set for WHITE or
FLARE.)
BLACK 0000 –99 to +99
FLARE 000 –99 to +99
GAMMA 0000 –99 to +99
V MOD 0000 –99 to +99
FLARE ON ON, OFF
V MOD ON ON, OFF
D. SHAD OFF ON, OFF
TEST OFF OFF, SAW, 3STEP, 10STEP
Page title No. Item Default Settings Remarks
To Next Page
Loading...
