Sony HDR-AS15 Handbook

Table of
contents
Operation
Search
Settings
Search
Index
25
US
USB Power Supply
When connecting the camera to a computer or USB device with the micro USB cable (supplied),
the camera can be set so the connected device supplies power to it.
To make the setting, select [SETUP] first.
1 Press the NEXT button to display [SETUP], then press the ENTER button.
2 Press the NEXT button to display [USBPw] (USB Power), then press the
ENTER button.
3 Press the NEXT button to select the setting, then press the ENTER
button.
• If you change the setting while the micro USB cable is connected, disconnect the cable, then reconnect.
• Power may not be supplied properly from a USB device with a power supply capacity of less than 1.5 A.
Supplies power from a connected device, through the micro USB cable.
Does not supply power from a connected device, through the micro USB cable.
Returns to the [USBPw] menu.
Notes
t
Setting
display

Sony HDR-AS15 Specifications