Chapter 10
Setup Menus
Chapter 10
Setup Menus 10-33
Item number Item name Settings
Menu items in the range 900 to 999, relating to digital processing (continued)
961 BACKGROUND COLOR
(UC)
(HDW-M2000/M2000P
only. Invalid in 24PsF or
23.98PsF mode.)
Set the color of the part where no material exists (background) for up-converting.
BACK GROUND COLOR: Set the color.
BLACK : Black
GRAY: Gray
BLUE: Blue
TABLE: Set with the following Y/P
B/PR tables.
Y TABLE: Adjust the background Y level.
0 to FFH
B-Y TABLE: Adjust the background B–Y level.
0 to 80 to FFH
R-Y TABLE: Adjust the background R–Y level.
0 to 80 to FFH
958 H DETAIL FREQUENCY
(UC)
(HDW-M2000/M2000P
only. Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment. Set the central frequency
and frequency characteristic for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz : 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
959 H/V RATIO (UC)
(HDW-M2000/M2000P
only. Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment. Set the horizontal/vertical
ratio for edge enhancement.
0 to 3 to 7
960
GAMMA LEVEL (UC)
(HDW-M2000/M2000P
only. Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment. Adjust the slope of the
correction curve.
0 to 80H to 100H
To Next Page
