Sony Hi8 EVV-9000P - Audio Input

Tape controls
section
Power
Audio input
section _
EJECT button ”
Press down to’open the cassette holder. The botton can be pushed with the lid
either closed or open.
Tape transport buttons and indicators ”
44 REW (rewind) button and indicator
@ STOP button
bP F FWD (fast forward) button and indicator
b& PLAY button and indicator
1) These buttons are deactivated while the VTR is recording.
See “Use of the transport buttons”, on page 29.
[20] Battery compartment
Insert a charged NP-1A/1B battery pack (not supplied).
[21] PUSH button
Press down to open the lid of the battery compartment.
[22] DC IN 12V connector (XLR, 4pin)
Connect a CMA-8CE camera adaptor (not supplied) to operate the VTR with an
AC power supply.
[23] MIC/LINE selector
Set to this position when connecting external microphones to
AUDIO CH-1 [25] or AUDIO CH-2 [24].
Set to this position when connecting the audio system to AUDIO
CH-1 [25] or AUDIO CH-2 [24].
LINE
[24] AUDIO CH-2 connector (XLR, 3-pin)
[25] AUDIO CH-1 connector (XLR, 3-pin)
15