Sony Hi8 EVV-9000P - To Remove the Battery Pack; To Charge the Battery Pack

. The NP-1A/1B battery pack (not supplied) provides
approximately 60 minutes of continuous operation with the
video camera attached, if the battery pack is fully charged.
. The operating time will be shorter in a cold place.
To insert the battery pack
1 Press the PUSH button to open the lid. | 2? Insert the battery pack and close the lid.
esas
recmnteometmac nmin am ha SSRN ES USUARIOS UR RLS OTS SN BIE YAN SE ROMER ARSE BDSM INNER EROS NY HOME SS IEEE PSS AES PINAR SSH CORE NEEE ES ROWSE PLE IE SAO EI ESHER
To remove the battery pack
Be careful not to let any metal object touch on the metal
Press the PUSH button to open the battery compartment, parts of the battery pack.
and take out the battery pack.
To charge the battery pack
Before using the battery pack, be sure to charge it using the
optional BC-1WA battery charger. For details, refer to the
instruction manual of the battery charger.
To check the battery voltage
Set the POWER switch to ON and the METER SELECT
switch to BATT. If the battery voltage is sufficient, the meter
pointer moves in the green zone. It is recommended to
check the battery voltage in the recording pause mode.
PCM 2/AFM/BATT
21