Need help?Do you have a question about the Sony HR Trinitron PVM-20M7MDE and is the answer not in the manual?
General| Screen Size | 20 inches |
|---|---|
| Aspect Ratio | 4:3 |
| Contrast Ratio | 1000:1 |
| Display Technology | CRT |
| Power Consumption | 120 W |
| Tube Type | Trinitron |
| Resolution | 800 TV lines |
| Input Connectors | BNC, Composite, S-Video |
Details the RS-232C connector pinout and signal assignments on the monitor for communication.
Specifies the required settings for RS-232C communication, including baud rate and parity.
Defines the structure of data sent between the computer and the monitor via the RS-232C interface.
Outlines the communication initiative, monitor responses (ACK/NAK), and timing constraints.
Provides step-by-step instructions for connecting and initiating RS-232C control of the monitor.
Lists commands sent from the computer and their corresponding monitor responses.
Command to control video signal settings like input connector, sync, and underscan mode.
Commands to toggle monitor functions like REMOTE, DEGAUSS, and POWER SAVING ON/OFF.
Commands for selecting display language and RGB/Component input modes.
Commands for adjusting white balance and saving data to non-volatile RAM.
Commands to adjust sub controls like volume, contrast, and landing data.
Command to reset various monitor data points to factory default values.
Commands to request current status of input signals, white balance, and operation.
Monitor responses to Sense commands, providing status data for various functions.
Command to request the current status of the monitor's remote control function.
Monitor replies indicating command reception (ACK) or communication errors (NAK).
To Next Page