Sony Trinitron HMD-A200/L User Manual (English)

Questions and Answers:

V
Veronica JohnsonAug 14, 2025
What to do if Sony Monitor picture flickers?
- L
  lawsonkyleAug 14, 2025
  If your Sony Monitor's picture flickers, bounces, oscillates, or is scrambled, potential causes include external electric or magnetic fields. Try to isolate and eliminate sources like other monitors, laser printers, electric fans, fluorescent lighting, or televisions. Move the monitor away from power lines or use a magnetic shield. You can also try plugging the monitor into a different AC outlet, preferably on a different circuit, or turning the monitor 90° to the left or right. Also, ensure the graphics mode is supported by the monitor (check your graphic board manual) and adjust the computer’s refresh rate for the best picture.
S
Suzanne MorganAug 17, 2025
Why does my Sony Trinitron HMD-A200/L have no picture?
- J
  Justin Armstrong Jr.Aug 17, 2025
  If your Sony Monitor displays no picture, several factors could be the cause. Ensure the power cord is properly connected and the power switch is in the "on" position. Verify the video signal cable is securely connected and that all plugs are firmly seated. Check the HD15 video input connector for bent or pushed-in pins. Also, make sure your computer is not in power saving mode (try pressing a key or moving the mouse) and that the computer's power is on. Finally, confirm that the graphic board is completely seated in the proper bus slot.
A
Amber WangAug 21, 2025
What to do if OUT OF SCAN RANGE message appears on Sony Trinitron HMD-A200/L Monitor?
- A
  andersondavidAug 21, 2025
  If the 'OUT OF SCAN RANGE' message appears on your Sony Monitor, ensure the video frequency range is within the specified limits for the monitor. If you recently replaced an old monitor, reconnect the old one and adjust the frequency range to: Horizontal: 30 – 70 kHz, Vertical: 48 – 120 Hz.
E
Elizabeth MendezAug 25, 2025
How to fix fuzzy picture on Sony Monitor?
- C
  Christy AshleyAug 25, 2025
  To resolve a fuzzy picture on your Sony Monitor, you can try the following: * Adjust the brightness and contrast. * Degauss the monitor. * Decrease the moire cancellation effect.
J
Jacqueline WhiteAug 27, 2025
Why do my USB peripherals not function on Sony Trinitron HMD-A200/L Monitor?
- S
  Sheryl RodriguezAug 28, 2025
  If your USB peripherals aren't functioning with your Sony Monitor, check that the appropriate USB connectors are securely connected. Ensure the power switch is in the "on" position and that any self-powered USB devices are also powered on. Consider installing the latest device drivers for your peripherals. If you are using a USB keyboard or mouse, try connecting them directly to your computer and rebooting. You may also need to check the Device Manager for USB controller issues or disabled USB devices in your hardware profile.
T
trevor66Aug 31, 2025
How to stop Sony Trinitron HMD-A200/L picture ghosting?
- M
  Misty JohnsonAug 31, 2025
  If your Sony Monitor picture is ghosting, eliminate the use of video cable extensions and/or video switch boxes. Also, check that all plugs are firmly seated in their sockets.
P
Patrick CannonSep 3, 2025
How to fix color uniformity on Sony Trinitron HMD-A200/L?
- T
  Tamara MirandaSep 3, 2025
  If the color is not uniform on your Sony Monitor, and you suspect it's due to equipment generating a magnetic field, degauss the monitor. Be mindful that placing equipment like speakers near the monitor or changing the monitor's direction can affect color uniformity.
C
Courtney PhillipsSep 7, 2025
Why does my Sony Trinitron HMD-A200/L Monitor make humming noise?
- K
  Kelly ValenciaSep 7, 2025
  If you hear a hum right after turning on your Sony Monitor, it's likely the sound of the auto-degauss cycle, which runs for 5 seconds during startup. If a second degauss cycle is needed, wait at least 20 minutes. This humming is normal operation and not a malfunction.

Sony Trinitron HMD-A200/L Specifications

General

Display Technology	CRT
Aspect Ratio	4:3
Refresh Rate	75 Hz
Dot Pitch	0.24 mm
Horizontal Scan Rate	30-92 kHz
Vertical Refresh Rate	50-160 Hz
Bandwidth	230 MHz
Input Signal	Analog RGB
Input Connectors	15-pin D-sub
Dimensions (WxHxD)	18.5 x 17.5 x 18.3 inches
Weight	48.5 lbs
Resolution	1600 x 1200
Power Consumption	120 W (Typical)