Amplifier Operation
masterpage:Right
lename[C:\Documents and
ettings\pc13\Desktop\J9031708_4252085411HT5800DPUS\4252085411\GB04BSC_HT-
800DP-US.fm]
21
US
model name1[HT-5800DP]
model name2[HT-4850DP]
model name3[HT-4800DP]
-
-
-
Changing the information in
the display
You can check the sound field etc. by changing
the information in the display.
Press DISPLAY repeatedly.
Each time you press DISPLAY, the display will
change cyclically as follows.
Index name of the input
*
t Selected input t
Sound field currently applied
When the tuner is selected
Preset station name
*
t Frequency t Sound
field currently applied
* Index name appears only when you have assigned
one to the input or preset station (page 30). Index
name does not appear when only blank spaces have
been entered, or it is the same as the input name.
Adjusting the brightness of
the display
Press DIMMER repeatedly.
The brightness of the display will change in 3
steps.
Changing the display
GB01COV_HT-5800DP-US.book Page 21 Wednesday, March 17, 2004 5:48 PM
To Next Page
Loading...
Need help?
General
