17
US
Getting Started
To install the Sound Bar facing
front
1 Attach a side stand (for front-
facing installation) to each side.
To install the Sound Bar tilting
upward
1 Remove the center stand.
2 Attach a side stand (for upward-
tilting installation) to each side.
You can install the Sound Bar on the
wall.
Use screws that are suitable for the wall
material and strength. As a plaster
board wall is especially fragile, attach
the screws securely to a wall beam.
Install the Sound Bar on a vertical and
flat reinforced area of the wall.
Be sure to subcontract the installation
to Sony dealers or licensed contractors
and pay special attention to safety
during the installation.
Sony is not responsible for accidents or
damage caused by improper
installation, insufficient wall strength,
improper screw installation or natural
calamity, etc.
Installing the Sound Bar on
a rack
To Next Page
Loading...
