Sony HT-CT80 - Product Specifications; Sound Bar and Subwoofer Technical Data

27
GB
Additional Information
Specifications
Amplifier section
POWER OUTPUT (rated)
Front L + Front R:
12 W + 12 W (at 4 ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R:
20 W (per channel at 4 ohms, 1 kHz)
Subwoofer amplifier section
POWER OUTPUT (reference)
40 W (at 8 ohms, 100 Hz)
Inputs
OPTICAL
ANALOG
USB Section
(USB) port
Type A
BLUETOOTH section
Communication system
BLUETOOTH Specification version 4.0
Output
BLUETOOTH Specification Power Class
2
Maximum communication range
Line of sight approx. 10 m
1)
Maximum number of devices to be
registered
8 devices
Frequency band
2.4 GHz band (2.4000 GHz -
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
2)
A2DP (Advanced Audio Distribution
Profile)
Supported Codecs
3)
SBC
4)
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency
44.1 kHz)
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone, reception sensitivity,
operating system, software application,
etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Subband Codec
Speakers
Front L/Front R speaker section
Speaker system
2-way speaker system, Acoustic
suspension
Speaker
Tweeter: 14 mm - 25 mm balance
dome type
Woofer: 35 mm × 120 mm cone type
General
Power requirements
220 V - 240 V AC, 50 Hz/60 Hz
Power consumption
On: 21 W
Standby mode: 0.5 W or less
Dimensions (approx.) (w/h/d)
901 mm × 52 mm × 84 mm
Mass (approx.)
2kg
Speaker system
Subwoofer system, Bass reflex
Speaker
130 mm cone type
Dimensions (approx.) (w/h/d)
170 mm × 245 mm × 300 mm
Mass (approx.)
2.7 kg
Design and specifications are subject to
change without notice.
Bar Speaker (SA-CT80)
Subwoofer (SS-WCT80)