EasyManua.ls Logo

Sony HT-K25 - Specifications

Sony HT-K25
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
GB
General
Power requirements
Area code Power requirements
CEL, CEK, SP 220–230 V AC, 50/60 Hz
MX 120 V AC, 60 Hz
Power consumption 68 W
Power consumption (during standby mode)
0.8 W
Dimensions (w/h/d)
Control center 196 × 60 × 269 mm
including projecting parts
and controls
Subwoofer 224 × 318.5 × 344 mm
including front panel
Mass (Approx.)
Control center 1.1 kg
Subwoofer 7.1 kg
Satellite speaker section
Front, center and surround speakers
SS-K25
Speaker system Full range, magnetically
shielded
Speaker units 5.7 cm cone type
Enclosure type Bass reflex
Rated impedance 6 ohms
Sensitivity level 85 dB (1 W, 1m)
Frequency range 130 Hz – 20,000 Hz
Dimensions (w/h/d)
Approx. 77
×
115
×
89 mm
including front grille
Mass Approx. 0.5 kg
Design and specifications are subject to change
without notice.
Specifications
Amplifier/subwoofer section
POWER OUTPUT
Rated Power Output at Stereo mode
(6 ohms 1 kHz, THD 0.7 %)
40 W + 40 W
Reference Power Output
(THD 0.7 %) Front*: 40 W/ch
Center*: 40 W
Surround*: 40 W/ch
(6 ohms)
Subwoofer: 70 W
(3 ohms)
* Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
20 Hz – 20 kHz
Inputs (Digital)
AUX (Coaxial) Impedance: 75 ohms
S/N: 90 dB
(A, 20 kHz LPF)
DVD, SAT (Optical) S/N: 90 dB
(A, 20 kHz LPF)
Inputs (Analog)
TV, VIDEO Sensitivity: 700 mV
Impedance: 50 kohms
S/N: 84 dB
(A, 20 kHz LPF)
Enclosure type Advanced S.A.W.
magnetically shielded
Speaker unit 16 cm cone type
Rated frequency range
30 Hz – 200 Hz
High frequency cut-off frequency
150 Hz

Table of Contents

Other manuals for Sony HT-K25

Related product manuals