Getting Started
7
GB
Setting for when you use Sony DVD player or “Play Station 2”
When you connect DVD player or “Play Station 2” as shown on the previous page, perform the
following settings on each component. For details, refer to the operating instructions supplied with
each component.
<DVD player>
1 Select “AUDIO SETUP” in the setup
display.
2 Set “AUDIO DRC” to “WIDE RANGE”.
3 Set “DIGITAL OUT” to “ON”.
4 Set “DOLBY DIGITAL” to “DOLBY
DIGITAL”.
5 Set “DTS” to “ON”.
<“Play Station 2”>
1 Select “AUDIO SETTING” in the setup
display.
2 Select “AUDIO DIGITAL OUTPUT”.
3 Set “OPTICAL DIGITAL OUTPUT” to
“ON”.
4 Set “DOLBY DIGITAL” to “ON”.
5 Set “DTS” to “ON”.
“Play Station 2” is a trademark of Sony Computer Entertainment.
To Next Page
Loading...
