Output
BLUETOOTH Specification Power Class 2
Maximum communication range
Line of sight approx, 10 m (}}3 ft) 1)
Maximum number of devices to be registered
9 devices
Frequency band
2,4 GHz band (2,4000 GHz - 2,4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles 2)
A2DP (Advanced Audio Distribution Profile)
AVRCP 1,3 (Audio Video Remote Control Profile)
Supported Codecs s)
SBC4) AAC s), aptX
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency 44,1 kHz)
1) The actual range will vary depending on factors such as obstacles
between devices, magnetic fields around a microwave oven, static
electricity, cordless phone, reception sensitivity, operating system,
software application, etc,
2) BLUETOOTH standard profiles indicate the purpose of BLUETOOTH
communication between devices,
3) Codec: Audio signal compression and conversion format
4) Subband Codec
5) Advanced Audio Coding
Front L/Front R speaker blocks
Speaker system
2-way speaker system, Acoustic suspension
Speaker
Woofer: 65 mm (2 5/8 in) cone type, Magnetic fluid speaker
Tweeter; 20 mm (13/16 in) dome type
Rated impedance
4 ohms
Center speaker block
Speaker system
Full range speaker system, Acoustic suspension
16us
Speaker(5 speakers)
65 mm (2 5/8in)conetype, Magneticfluid speaker
Ratedimpedance
4 ohms
General
Power requirements
120 V AC, 60 Hz
Power consumption
On: 50 W
"Control for HDMI" is off(Standby mode): 0,5 W or less
BLUETOOTHStandby mode: 0,5 W or less
Dimensions (approx,) (w/h/d)
1,080 mm ×109 mm × 110mm (42 5/8 in ×4 3/8 in ×4 3/8 in)
(without grille frame, without stands)
1,080 mm ×109 mm × 129 mm (42 5/8 in ×4 3/8 in × 51/8 in)
(with grille frame, without stands)
1,080 mm ×129 mm ×138 mm (42 5/8 in × 51/8 in × 51/2 in)
(with grille frame, with stands)
1,080 mm ×129 mm ×130 mm (42 5/8 in × 51/8 in × 51/8 in)
(without grille frame, with stands)
Mass (approx,)
7,9 kg (17Ib 6 5/8 oz) (with grille frame, with stands)
Subwoofer (SA-WST7)
POWER OUTPUT (reference)
100 W (per channel at 4 ohms, 100 Hz)
Speaker system
Subwoofer, Passive radiator type
Speaker
180 mm (7 1/8 in) cone type
200 mmx 300 mm (7 7/8 in x 117/8 in) cone type, Passive radiator
Rated impedance
4 ohms
Power requirements
120 V AC 60 Hz
Power consumption
On: 30 W
Standby mode: 0,5 W or less
Dimensions (approx,)
241 mmx 391 mmx 411 mm (9 1/2 in x 15 1/2 in x 16 1/4 in)
(w/h/d)
To Next Page
Loading...
